[Jan-2026] CTS-I Exam Dumps Pass with Updated 2026 Certified Technology Specialist - Installation
Free CTS-I Exam Dumps to Pass Exam Easily
AVIXA CTS-I - Installation Exam Syllabus Topics:
| Topic | Weight |
|---|---|
| Duty A: Conducting Pre-Installation Activities | 20% |
| Task 1: Review Audiovisual Project Documentation | 4% |
| Task 2: Conduct Technical Site Survey | 4% |
| Task 3: Prepare for Audiovisual Installation | 4% |
| Task 4: Evaluate Overall Facility Readiness | 4% |
| Task 5: Conduct On-Site Preparations for Installation | 4% |
| Duty B: Conducting Site Rough-In/First-Fix | 10% |
| Task 1: Deinstallation of Existing Equipment and cabling | 2% |
| Task 2: Mount Substructure | 4% |
| Task 3: Pull Cable | 4% |
| Duty C: Installing Audiovisual Systems | 38% |
| Task 1: Assemble AV Rack | 4% |
| Task 2: Wire the AV Equipment Rack | 5% |
| Task 3: Distribute AV Equipment | 4% |
| Task 4: Mount AV Equipment | 4% |
| Task 5: Terminate Cables | 5% |
| Task 6: Configure Network Properties of Equipment | 4% |
| Task 7: Load Configuration and Control Programs | 4% |
| Task 8: Test the AV System | 4% |
| Task 9: Calibrate the AV System | 4% |
AVIXA CTS-I Exam Certification Details:
| Number of Questions | 110 |
| MemberExam Price | $475(USD) |
| Exam Code | CTS-I |
| Exam Name | AVIXA Certified Technology Specialist - Installation (CTS-I) |
| Non-Member Exam Price | $575(USD) |
NEW QUESTION # 112
Component video requires _____ cable(s) to carry the signal.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 113
When mounting a 75 lb (34 kg) projector with a 15 lb (7 kg) mount, the substructure should be able to support a minimum weight of:
[Conducting Site Rough-In/First-Fix/Mount Substructure]
Response:
- A. 180 lbs (82 kg)
- B. 270 lbs (122 kg)
- C. 90 lbs (41 kg)
- D. 450 lbs (204 kg)
Answer: D
NEW QUESTION # 114
What is the industry best practice when troubleshooting?
Response:
- A. Change only one thing at a time
- B. Change the faulty device right away
- C. Change the signal analyzer
- D. Change the signal generator
Answer: A
NEW QUESTION # 115
Which device is used for sending the same video signal to multiple destinations?
- A. Media player
- B. Distribution amplifier
- C. Matrix switcher
- D. Scan converter
Answer: B
NEW QUESTION # 116
What can cause a mounting malfunction? (Choose all that apply.)
- A. Installing a mount directly to a ceiling tile
- B. Improperly placing bolts
- C. Exceeding the load limit
- D. Connecting a mount to blocking
Answer: A,B,C
NEW QUESTION # 117
Prior to disposing of waste on a job site what should the installer confirm first?
Response:
- A. Where the dumpster is located
- B. Whether the general contractor has a dumpster onsite
- C. Where to dispose of cardboard
- D. Is there a dedicated laborer to dispose of debris from the work site
Answer: D
NEW QUESTION # 118
Heat shrink tubing is used to:
- A. Terminate a cable that is no longer in use
- B. Protect the cable from fire damage
- C. Add length to a cable that was terminated improperly
- D. stabilize cable assemblies where the connector joins the cable
Answer: D
NEW QUESTION # 119
Which of the following are parts of an IP address for a networked device? (Choose all that apply.)
- A. Bit rate
- B. Subnet mask
- C. Host identifier
- D. Network identifier
Answer: B,C,D
NEW QUESTION # 120
Why is equipment grounded or wired to the earth?
- A. to direct excess voltage along the paths of least resistance
- B. to secure equipment in the event of a natural disaster
- C. to comply with energy conservation regulations
- D. to limit human exposure to high-voltage electricity
Answer: D
NEW QUESTION # 121
Which organization's general safety codes and regulations must you follow when visiting a job site?
- A. The client
- B. The client's insurance company
- C. Your company
- D. The AHJ
Answer: D
NEW QUESTION # 122
In the AV Industry, _____ (tin/lead) solder is typically used.
- A. 50/50
- B. 28/72
- C. 40/60
- D. 63/37
Answer: D
NEW QUESTION # 123
According to the ANSI/INFOCOMM 3M-2011 Projected Image System Contrast Ratio (PISCR) standard, what is the minimum contrast ratio of basic decision-making tasks?
Response:
- A. 7:1
- B. 80:1
- C. 50:1
- D. 15:1
Answer: D
NEW QUESTION # 124
The ___ of a screen should be the same aspect ratio as the projected image.
- A. height
- B. size
- C. shape
- D. keystone
Answer: C
NEW QUESTION # 125
A technician is servicing a projector with a problematic RGBHV input. The image has a pink hue. What is the cause for the pink hue?
Response:
- A. Lamp is reaching end of life
- B. Loss of green signal
- C. Loss of vertical sync
- D. Loss of horizontal sync
Answer: B
NEW QUESTION # 126
What type of connector is shown in the following image?
Response:
- A. RCA
- B. XLR
- C. VGA
- D. BNC
Answer: B
NEW QUESTION # 127
Which of the following describes the number of cycles in a given time period?
- A. frequency
- B. Magnitude
- C. wavelength
- D. amplitude
Answer: A
NEW QUESTION # 128
Which of the following should be included in a Network Device Inventory? (Choose all that apply.)
- A. MAC address of each device
- B. Ports used by each device
- C. Device model numbers and firmware versions
- D. Physical dimensions of each device
Answer: A,B,C
NEW QUESTION # 129
When mounting a 75lb (34 kg) projector with a 15lb (7 kg) mount, the substructure should be able to support a minimum of:
- A. 450lbs (204 kg)
- B. 90lbs (41 kg)
- C. 270lbs (122 kg)
- D. 180lbs (82 kg)
Answer: A
NEW QUESTION # 130
Individual pieces of rack mounted equipment are separated by signal type because:
- A. This helps protect the signals against induced noise.
- B. Audio equipment is heaviest and should be at the bottom of the rack.
- C. Signals flow down, not up.
- D. Logical groupings of equipment are easier for the user.
Answer: A
NEW QUESTION # 131
Which abbreviation on a drawing tells you that you will not need to install a specific display screen?
Response:
- A. OD
- B. OC
- C. OFOI
- D. NTS
Answer: C
NEW QUESTION # 132
What is the function of a back box?
- A. It limits the low frequency response of the loudspeaker
- B. It helps hold the wires stable as you crimp butt splices onto them
- C. It keeps sound contained into a single room
- D. It transmits sound to adjoining areas through the ceiling space
Answer: C
NEW QUESTION # 133
How do you determine bolt depth?
- A. Insert different bolt types in the mounting hole until you find one that seems to turn easily in the hole.
- B. Insert a tool or screw driver into the mounting hole in the electronic device as a depth gauge.
- C. Thread a long bolt into the mounting hole and turn it until it becomes difficult to turn, and then mark the threads of a bolt.
- D. Drill a screw into the mounting hole and pull on it to see if it seems sturdy. If it doesn't move, it's safe to use.
Answer: B
NEW QUESTION # 134
Which of the following should a maintenance log include? (Choose all that apply.)
- A. Devices replaced
- B. Date of service
- C. Description of problem
- D. Name of technician
Answer: A,B,C,D
NEW QUESTION # 135
Which of the following is the most important consideration during the installation of AV systems in a client- occupied space?
- A. Securing access to any office supplies or tools belonging to the client that may be useful in completing the installation
- B. Acoustically treating any spaces adjacent to the area where work will take place
- C. Ensuring your attire is as formal as the client's
- D. Avoiding disruptions to your client's business
Answer: D
NEW QUESTION # 136
......
CTS-I Exam Dumps, CTS-I Practice Test Questions: https://prepcram.pass4guide.com/CTS-I-dumps-questions.html