[Jun-2024] Use Real C_IBP_2311 Dumps Free Sample Questions and Practice Test Engine
Pass SAP C_IBP_2311 exam - questions - convert Tets Engine to PDF
NEW QUESTION # 25
You want to display and edit data in different Units of Measure (UOM). Which of the following must you consider before you use the UOM? Note: There are 3 correct answers to this question.
- A. Units of measure are usually not time-independent.
- B. Conversion to the target unit of measure is handled by the SAP IBP Excel add-in.
- C. Units of measure is an attributes of master data type, such as product
- D. Units of measure are usually not time-dependent
- E. Analytics allow the user to select the target unit of measure
Answer: C,D,E
NEW QUESTION # 26
For which of the following application jobs can you enter planning filters as parameters? Note There are 2 correct answers to this question.
- A. Purge Key Figure Data
- B. Purge Master Data
- C. Purge Non-Conforming
Answer: A,B
Explanation:
Create Time Periods for Time Profiles
NEW QUESTION # 27
What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct answers to this question.
- A. Configure at least one calculated key figure for the planning area
- B. Specify a planning horizon in the planning area for each level of the assigned time profile
- C. Assign the compound master data type and its component master data types
- D. Configure at most two input key figures on the same planning level in a key figure calculation
Answer: B,C
NEW QUESTION # 28
You are evaluating criteria for choosing the solver to support planning for a complex supply What are some of the points that should be reviewed? Note: There are 2 correct answers to this question.
- A. Finite heuristics works with demand prioritization
- B. Planning results can be generated faster by the optimizer.
- C. Prioritization of demand elements one by one is achieved by unconstrained heuristics
- D. Push and Pull production models are used by the optimizer
Answer: A,D
NEW QUESTION # 29
You need to work in two separate sessions for two different SAP IBP tenants. What can help you differentiate the appearance of their user interfaces? Note: There are 2 correct answers to this question
- A. Add the system name and tenant information from the About section to the Home pages
- B. Set a separate theme for the Home page in the Web UI.
- C. Have a different set to tiles in the Home group of apps
- D. Define a different default planning area via the User Preferences
Answer: B,C
NEW QUESTION # 30
What are some of the features of the network charts in SAP Integrated Business Planning for Supply Chain? Note: There are 2 correct answers to this question
- A. The network charts visualize relationships between warehouse, plants, customer, and supplier, for finished goods
- B. You can create a network chart from the dedicated app, or use the Analytic Advanced app
- C. To display the network chart, you need the Ship-From Location master data type in the planning area
- D. You can create a network chart from the dedicated app, or use the Manage Analytic Stories app
Answer: A,B
NEW QUESTION # 31
Which of the following solutions should be satisfied with violations penalized by the objective function ofthe time-series supply optimizer? Note: There are 3 correct answers to this question. Not adhering to maximum transport values
- A. Not respecting production capacity
- B. Not-fully satisfied demands
- C. Violation of minimum aggregated inventory vales
- D. Violation of minimum resource utilization
Answer: B,C,D
NEW QUESTION # 32
Which options can be used to reduce the runtimes of a time-series optimizer run? Note: There are 3 correct answers to this question.
- A. Eliminate the usage of telescopic time buckets
- B. Use non-overlapping networks by using Subnetworks ID maintained at Location-Products to reduce the size of the problem
- C. Keep the number of fairshare segments small
- D. Split into multiple planning areas to support weekly vs. daily planning needs.
- E. Increase the use of incremental lot size beyond the frozen horizon.
Answer: A,B,C
NEW QUESTION # 33
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned? Note: There are 2 correct answers to this question.
- A. Created as type DECIMAL and assigned to an external master data type
- B. Created as type INTEGER and assigned to a simple master data type
- C. Created as type DECIMAL and assigned to an compound master data type
- D. Created as type INTEGER and assigned to an compound master data type
Answer: B,C
NEW QUESTION # 34
The Planner Workspaces is an important User Interface of SAP IBP for Supply Chain. What are the value drivers to use this as a planner? Note: There are 3 correct answers to this question
- A. It can trigger SAP S/4HANA transactions in real time.
- B. Issues can be identified and solved with special functions
- C. It combine the data from multiple planning area into one user interface
- D. It combines various components into one user interface
- E. Application job can be started from this user interface
Answer: B,C,E
NEW QUESTION # 35
As an architect, you are configuring the Planner Workspaces user interface settings. Which appearance settings are on your to-do list? Note: There are 3 correct answers to this question
- A. Add playbooks for alerts
- B. Add custom alerts
- C. Add Navigation profile
- D. Adding planning view
- E. Define key figure formatting
Answer: A,B,D
NEW QUESTION # 36
Which apps can be enhanced with analytical charts? Note: There are 2 correct answers to this question.
- A. Planner Workspace
- B. Web-based Planning
- C. Intelligent visibility
- D. Dashboards Advanced
Answer: A,D
NEW QUESTION # 37
You need to create time periods for the time profile in a planning are
a. What should you be aware of when running the Create Time Periods application job?
- A. It is mandatory to specify the planning area in the Parameter Section of the application job
- B. The planning area to which the time profile is assigned must be active
- C. This application job can also be triggered from SAP IBP, add-in for Microsoft Excel
- D. A time profile has to be activated so that application job can proceed
Answer: D
NEW QUESTION # 38
What are the possible Master Data Maintenance options for SAP Integrated Business Planning for Supply Chain? Note: There are 3 correct answers to this question
- A. The data Integration job app
- B. The Planner Workspaces app
- C. The Manage Master Data app
- D. The Planning Areas Model Configuration app
- E. The SAP IBP, add - in for Micorsoft Excel
Answer: A,C,E
NEW QUESTION # 39
Manage Analytics Stories introduces advanced visualization features within SAP Integrated Business Planning for Supply Chain. What are some of the main capabilities of the stories? Note: There are 3 correct answers to this question.
- A. The story is structured around one responsive page
- B. Specific chart and table filters can be applied within the story
- C. Links to the external URLs can be embedded in the story.
- D. Stories must be re-created in each SAP IBP environment.
Answer: B,C,D
NEW QUESTION # 40
Which of the following conditions are relevant for subtotals in the planning view?Note: There are 2 correct answers to this question.
- A. Only attribute-based totals can be added to the planning view.
- B. The values of the attribute-based total at the highest attribute level in the planning level can be - changed
- C. The total value can be added before or after the selected attribute
- D. The Total number of the attribute that can use subtotal in the planning view can be restricted
Answer: C,D
NEW QUESTION # 41
A company only purchases a license for the SAP IBP S&OP module and wants to maximize the use of its standard functionality. What processes will they be able to cover? Note: There are 3 correct answers to this question O Get system-solving recommendations on how to react to production bottlenecks
- A. Build what if scenario for breaching supply-demand gaps
- B. Conduct Sales and Operations Planning meeting with cross functional representatives
- C. Prepare versions of S&OP plan based on different optimizer modelling costs
- D. Review critical resources against demand
Answer: A,B,C
NEW QUESTION # 42
Which Master Data Types are used in time-series-based planning within SAP IBP for response and supply? Note: There are 3 correct answers to this question
- A. Customer
- B. Transportation lane
- C. DS Order fulfilment
- D. Location
- E. Product
Answer: A,D,E
NEW QUESTION # 43
What is an example of a commonly used time-independent key figure?
- A. A Special key figure marked as an aggregate key figure (aggregate constraint)
- B. A currency conversion key figure, such as Exchange Rate
- C. Any attribute as a key figure
- D. A unit of measure key figure, such as UoM Conversion Factor
Answer: C,D
NEW QUESTION # 44
Which of the following are features of lag-based snapshots? Note: There are 2 correct answers to this question
- A. Lag-based snapshots are created in the Configuration app for a fixed time range.
- B. Target key figure for these snapshots are expressed to the user in planning view
- C. Target key figure for these snapshots must have lag as root attribute in the base planning leve
- D. The number of lag-based snapshots are limited to nine levels.
Answer: B,C
NEW QUESTION # 45
......
SAP C_IBP_2311 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Pass Your C_IBP_2311 Exam Easily - Real C_IBP_2311 Practice Dump Updated Jun 30, 2024: https://prepcram.pass4guide.com/C_IBP_2311-dumps-questions.html