2022 Reliable Study Materials & Testing Engine for HPE6-A81 Exam Success!
Validate your Skills with Updated HPE6-A81 Exam Questions & Answers and Test Engine
NEW QUESTION 28
Refer to the exhibit.
You have configured an Onboard portal for single SSID provision. During testing you notice that the QuickConnect Application did not display the "Connect" button, only the finish button. To get connected the test user had to manually connect to the secure-HS-5007 SSID but was prompted for a username and password. Using the screenshots as a reference, how would you fix this issue?
- A. Configure the SSID to support both EAP-PEAP and EAP-TLS authentication method
- B. Change the network settings to use EAP-TLS for the authentication protocol.
- C. Check the network settings for the correct SSID name spelling.
- D. Install a public signed HTTPS web server certificate on the ClearPass server
Answer: D
NEW QUESTION 29
A customer is planning to implement machine and user authentication on infrastructure with one Aruba Controller and a single ClearPass Server. What should the customer consider while designing this solution? (Select three.)
- A. The customer does not need to worry about Multi-Master Catht Survivability because the Controller will also cache the machine state.
- B. Onboard must be used to install the Certificates on the personal devices to do the user and machine authentication
- C. The Windows User must log off. restart or disconnect their machine to initiate a machine authentication before the cache expires.
- D. Machine Authentication only uses EAP TLS. as such a PKI infrastructure should be in place for machine authentication.
- E. The Customer should enable Multi-Master Cache Survivability as the Aruba Controller will not cache the machine state.
- F. The machine authentication status rs written in the Multi-master cache on the ClearPass Server for 24 hrs
Answer: B,C,F
NEW QUESTION 30
The customer would like to add a default common self-registration sponsor email under the initial value on all the ten self-registration pages created for different locations except for the guest registration page created for Sunnyvale location to use a different sponsor email in initial value. Under self-registration form fields, you have "Edit" and "Edit Base Field" Which edit options will you choose to make minimal configuration changes to implement the customer's requirement? (Select two)
- A. Update the sponsor email by clicking on both "Edit" and "Edit Base Field" options of the sponsor_email filed on the Sunnyvale register page
- B. Update the common sponsor email by clicking the "Edit" option of the sponsor email form field on the one of the self-registration register form page
- C. Update the specific sponsor email by clicking on the "Edit" option of the sponsor_email form filed on the Sunnyvale self-registration register form page
- D. Update the common sponsor email by clicking the "Edit Base Field" option of the sponsor_email form field on the one of the self-registration form page
- E. Update the specific sponsor email by clicking on "Edit Base Field" option of the sponsor_email form filed on the Sunnyvale location register form page
Answer: A,B
NEW QUESTION 31
Refer to the exhibit.
What could be causing the error message received on the OnGuard client?
- A. The Service Selection Rules for the service are not configured correctly
- B. The Health-Check service does not have Posture Compliance option enabled
- C. There is a firewall policy not allowing the OnGuard Agent to connect to ClearPass
- D. The client's OnGuard Agent has not been configured with the correct Policy Manager Zone.
Answer: A
NEW QUESTION 32
The customer has configured the guest self-registration with sponsor approval. The guest users that the sponsor email and the other requested details while registering the account but the users were able to complete the authentication and access the internet without the sponsor's approval.
What configuration settings will you check to make this setup work?
- A. Check if authentication option n is enabled in the self-registration page enabled.
- B. Check if sponsor email field is enabled in the register form page
- C. Check if sponsor name field is enabled in the register form page
- D. Check if sponsor confirmation is enabled in the self-registration page
Answer: B
NEW QUESTION 33
Refer to the exhibit.
A customer has configured Onboard in a cluster. After the Primary server's failure, the BYOD devices fail to connect to the network. Which step below is the best starting point when troubleshooting'
- A. Reboot the active ClearPass server and reconnect the client to the SSID by selecting the correct certificate when prompted.
- B. Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.
- C. Verify the CPPM hostname in OSCP URL under TLS authentication method is updated to localhost instead of primary server's hostname.
- D. Check EAP certificate on the secondary node is issued by the same common root Certificate Authority (CA).
Answer: C
NEW QUESTION 34
Refer to the exhibit.
A customer has configured Onboard in his lab ClearPass server and Windows devices work as expected but cannot get the Apple iOS devices to Onboard successfully Where would you look to troubleshoot the issue? {Select two)
- A. Check if the ClearPass HTTPS server certificate installed in the server is issued by a trusted commercial certificate authority.
- B. Check if the customer installed the internal PKI Root certificate presented by the ClearPass during the provisioning process.
- C. Check if the customer has installed a custom HTTPS certificate for iOS and another internal PKI HTTPS certificate for other devices.
- D. Check if the customer has installed the same internal PKI signed RADIUS server certificate as the HTTPS server certificate.
- E. Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.
Answer: A,E
NEW QUESTION 35
There is an Aruba Controller configured to stand Guest AAA requests to ClearPass If the customer would likt tht most effective way to ensure the lowest license usage counts, how should the controller be configured?
- A. Aruba Controller will send stop messages if RADIUS Accounting Server Group is defined in the authentication profile.
- B. Aruba Controller will send stop messages only if both accounting and Interim accounting are enabled.
- C. Aruba Controller will send stop messages only if EAP termination and Interim accounting are enabled.
- D. Configure EAP Termination on the Aruba Controller and the client will send a stop message.
Answer: A
NEW QUESTION 36
Refer to the exhibit.
When creating a new report, there is in option to send report Notifications by Email Where is the email server configured?
- A. In the ClearPass Policy Manager Messaging Setup under Administration.
- B. In the Insight report on the next screen of the report definition
- C. In the ClearPass Policy Manager Endpoint Context Servers under Administration.
- D. In the Insight Reports Interface under Administration on the sidebar menu
Answer: C
NEW QUESTION 37
A customer has two different geographical sites deployed with two ClearPass servers in each site. Site A has the Publisher (CPPM1) and a subscriber (CPPM2) and Site B has two subscribers (CPPM3 S CPPM4) All wired and wireless authentication requests from the respective sites are handled by respective CPPMs deployed in the sites When both the CPPM servers in Site B are lost, the authentications from Site B is handled by Site A subscriber (CPPM2). To control the Multi-Master Cache flush and reduce the amount of inter-site traffic, the customer also created a new Policy Manager Zone (Zone1) The Site B CPPM3 & CPPM4 are part of Zone! and Site A CPPM2 is also mapped to Zone1 as it will act as the backup RADIUS server for Site B The corporate laptops are installed with Persistent agent to run the OnGuard check and the OnGuard settings are also mapped to the Zones The Site A corporate user subnets are mapped to default zone and the Site 6 corporate user subnets are mapped to Zone1. The customer has the following issue in the setup: The corporate clients from Site A authenticating against the CPPM2 as their Primary RADIUS server assigns Quarantine enforcement profile even though the user s health status is Healthy.
What is the cause of this issue?
- A. Multi-master cache also contains the roles and posture of the connected clients and is shared across all members part of the cluster. The OnGuard setting for Site A is part of only the default zone and the OnGuard system health validation information is sent to one of the nodes that is part of its home zone only. As the CPPM2 is also not mapped to the default zone as well as Zone1, CPPM2 fails to apply the enforcement profile based on correct health status.
- B. Multi-master cache also contains the roles and posture of the connected clients and is shared only with the members part of that Policy Manager Zone. CPPM2 belongs to Zone1 and the OnGuard setting for Site A is part of the default zone and the OnGuard system health validation information is sent to one of the nodes that are part of its home zone only. As Posture cache for Site A is not available with CPPM2. it fails to apply the enforcement profile based on correct health status.
- C. Multi-master cache also contains the roles and posture of the connected clients and is shared across all members part of the cluster. The OnGuard setting for Site A is part of only the default zone and the system health validation information is sent to one of the nodes that are part of its home zone only As the OnGuard setting of the Site A corporate user subset is not mapped with default as well as Zone1. CPPM2 fails to apply the enforcement profile based on correct health status.
- D. Multi-master cache also contains the roles and posture of the associated and unassociated clients and is shared with all members part of that Policy Manager Zone. CPPM2 belongs to Zone1 and the OnGuard setting for Site A is part of the default zone and the system health validation information is sent to one of the nodes that are part of its home zone As Posture cache for Site A hi not available with CPPMZ. it fails to apply the enforcement profile based on correct health status.
Answer: C
NEW QUESTION 38
While configuring the service rule conditions which NAS-Port-Type value should be used to differentiate the service for wired and wireless authentication?
- A. Ethernet (5) and Wireless-802 11 (9)
- B. Ethernet (O)and W.reless-802 11 (1)
- C. Ethernet (15) and Wireless-802 II (19)
- D. Ethernet (19) and Wireless-802 11(18)
Answer: A
NEW QUESTION 39
Refer to the exhibit.
You have set up a home lab for ACCX exam preparation with Aruba Clear Pass integrated with Aruba Controller and Instant Access Point Guest Mac Caching functionality is configured only for Aruba Controller's guest SSID and a common Web Login page is configured for both NAD devices You tested and verified the mac caching functionality for a client by connecting it to the Aruba Controller's guest SSID.
What will happen when you disconnect the client from Aruba Controller's guest SSID and connect it to Instant APs guest SSID?
- A. The client does not have to complete any authentication as the re-connection was immediate.
- B. The client will bypass the captive portal authentication by completing the MAC authentication.
- C. The client will be redirected to the captive portal page to complete the web authentication.
- D. The client will fail the mac authentication and will be redirected to the captive portal page.
Answer: B
NEW QUESTION 40
Refer to the exhibit.
A customer it troubleshooting a client not getting the SHV posture updated and the OnGuard agent shows the Health Status Not Known. What could the user do to update the health status?
- A. modify the agent.conf file and add the WIRED interface to it
- B. change the Policy Manager Zone mapping and add the WIRED interface range
- C. connect using an interface that is configured as Managed Interface
- D. reinstall the OnGuard agent from the Wired interface
Answer: A
NEW QUESTION 41
A customer has deployed an OnGuard Solution to all the corporate devices using a group policy result to push the OnGuard Agtnts. The network administrator is complaining that soma of the agents are communicating to the ClearPass server that is located in a DMZ. outside the firewall The network administrator wants all of the agents System Health Validation traffic to stay inside the Management subnets.
What can the ClearPass administrator do to move the traffic only to the ClearPass Management Ports?
- A. Edit the agent.conf file being deployed to the clients to use the ClearPass Management Port for SHV updates
- B. Filter TCP port 6658 on the firewall, forcing the OnGuard agent to use the ClearPass Management port.
- C. Configure a Policy Manager Zone mapping so the OnGuard agent will use the Management Port IP.
- D. Select the correct OnGuard Agent installer, and use the one configured for Management Port for the clients.
Answer: B
NEW QUESTION 42
A customer has created a Guest Self-Registration page that they would like to use it as 'template' for all the new pages that are going to be created from now on. Their goal is to ensure that the header and footer on every page are the same, and any edits made to them are automatically reflected on every Self-Registration Page.
What should be configured in order to accomplish this request?
- A. Save the "template" page as Master Self'Registration page.
- B. Create child pages when creating new Self-Registration pages and select the "template" as Parent.
- C. Copy the "template" page and edit it each time a new Self-Registration Page is needed.
- D. Save this "template" page as a new Skin to be used on other Self-Registration pages.
Answer: A
NEW QUESTION 43
You have designed a ClearPass solution for an Information Technology Business Park with 50,377 concurrent sessions including the visitors. The deployment includes eight ClearPass servers handling RADIUS authentication. Guest Self-Registration. Onboard and OnGuard. CPPM1 is acting as Publisher. CPPM2 to CPPM8 are added as subscriber nodes CPPM4 is the designated Standby Publisher. Servers CPPM2 and CPPM3 will be handling the Guest and Onboard HTTPS traffic. On a few devices, Corporate users will perform username and password based authentication with Active Directory accounts and on few devices, they will be using private CA signed TLS certificates to do the authentication The customer has three Active Directories (AD1, AD2 and A03) part of Multi-Domain Forest. To provide authentication redundancy, the customer has configured multiple Virtual IP settings between ClearPass servers in a cluster.
On all the Network Access Devices (NAD), the primary authentication server is configured as the VIP IP address and the secondary authentication server rs configured as CPPM1 MGMT IP address Based on the information provided, which ClearPass nodes will you join to the AD domain
- A. Join CPPM1. CPPM4 to CPPM8 to the AD1. AD2 and AD3 domains.
- B. Join CPPM2 to CPPM7 ClearPass servers to the AD root domain.
- C. Join CPPM1. CPPM4 to CPPM7 servers to the AD root domain
- D. Join all the eight ClearPass servers to AD1, AD2 and AD3 domains.
Answer: A
NEW QUESTION 44
What is used to validate the EAP Certificate? (Select two.)
- A. Common Name
- B. Server Identity
- C. Key usage
- D. Date
- E. SAN entries
Answer: C,E
NEW QUESTION 45
Which statements art true about controller-initiated and server-initiated login method? (Select two)
- A. server-in it will login method should be used if the guest user s network login will be handled by the wired switch by standing the authentication request to (PPM when the user attempts a login
- B. server-initiated login method should be used if the guest user's network login will be handled by ClearPass by sending the authentication request to itself when the user attempts a login
- C. Controller-initiated login method should be used of the guest user's network login will be handled by the guest browser to perform the HTTP port when the user attempts a login
- D. server-initiated login method should be used if the guest users network login will be handled by the ClearPass by standing a CoA after authentication request is posted to itself when the user attempts a login
- E. Controller-initiated login method should be used if the guest user's network login will be handled by the controller-based AP to perform the HTTP post when the user attempts a login.
Answer: A,B,C
NEW QUESTION 46
Refer to the exhibit.
A customer hat configured the Aruba Controller for administrative authentication using ClearPass as A TACAC5 serve' During tasting, the read-only user is getting the root access role What could be a possible reason for this behavior? (Select two.)
- A. The ClearPass user role associated to the read-only user is wrong.
- B. The Controller's Admin Authentication Options Default role is mapped to root
- C. On the Controller, the TACACS authentication server is not configured for Session authorization
- D. The read-only enforcement profile is mapped to the root role
- E. The Controller Sarver Group Hatch Rules are changing the user role.
Answer: A,B
NEW QUESTION 47
Which using Allow All MAC AUTH, which authentication source should be mapped to the service?
- A. Any Authentication source
- B. Guest Device Database
- C. Static Host List
- D. Endpoint Database
Answer: C
NEW QUESTION 48
A customer has a Clear Pass cluster deployment with four servers, two servers at the data center and two servers at a large remote site connected over an SO-WAN solution. The customer would like to implement OnGuard. Guest Self-Registration, and 802.1 X authentication across their entire environment. During testing the customer is complaining that users connecting to an Instant Cluster Employee S5ID at the remote site, with the OnGuard Persistent Agent installed are randomly getting their health check missed.
What could be a possible cause of this behavior?
- A. The OnGuard Clients are automatically mapped to the Policy Manager Zone based on their IP range but an ACL on the switch could be blocking access.
- B. The Aruba-user-role received by the IAP is filtering the TCP port 6658 to the Clear Pass servers and after 10 seconds the SSL fallback gets activated and randomly generates the issue
- C. The traffic on the TCP port 6658 is congested due to the fact that this port is also used by the IPSec keep-alive packets of the SO-WAN solution.
- D. The ClearPass Policy Manager zones have been defined but the local IP subnets have not but properly mapped to the zones and the OnGuard Agent might connect to any of the servers in the cluster.
Answer: C
NEW QUESTION 49
Your customer has read about a feature in OnGuard for OnGuard Persistent Agent and Agentless OnGuard that can display a new Posture Results web page to notify that and users with posture results for unhealthy clients after the health check is done. Where do you configure this option?
- A. Policy Manager > Configuration > Enforcement > Profiles > Add new profile with Aruba Radius Enforcement as the template, and on the Attributes tab add the Aruba-User-Role configured with the captive portal profile mapped with default Posture Check web page URL.
- B. Policy Manager > Configuration > Enforcement > Profiles > Add a new profiles with Agent Enforcement as the template, and on the Attributes tab add the new Show Posture Results in Guest Page attribute and set the value for the attribute to true.
- C. Policy Manager > Configuration > Services > Edit the Web-base Health Check Only service, and on the posture tab under Remediation URL add the default Quarantined Blocked web page URL and complete the service configuration by hitting save.
- D. Policy Manager > Configuration > Services > Edit the Web-base Health Check Only service, and on the posture tab enable the checkbox for the new option Show Posture Results in Guest Page and complete the service configuration by hitting save.
Answer: C
NEW QUESTION 50
Refer to the exhibit.
A customer is trying to configure a TACACS Authentication Service for administrative what could be the reason for the Login Status REJECT?
- A. The Read-only Administrator role does not exist on the Controller.
- B. The password used by the administrative user is wrong.
- C. The Enforcement profile is not designed to be used on Aruba Controller
- D. The Enforcement profile used is not a TACACS profile.
Answer: A
NEW QUESTION 51
Which statements art true about the Database server certificate? (Select two)
- A. ClearPass Policy Manager nodes validates the Database certificate while joining the cluster
- B. Database certificate can be created to take a secure backup of the ClearPass database.
- C. Custom Database certificate requires Subject Alternative Name (SAN) field with the DNS name of the server.
- D. Database server certificate is optional for the ClearPass servers that are part of a Cluster.
- E. A change in Database certificate will only be applicable after a reboot of the node
Answer: A,C
NEW QUESTION 52
......
Regular Free Updates HPE6-A81 Dumps Real Exam Questions Test Engine: https://prepcram.pass4guide.com/HPE6-A81-dumps-questions.html