[Sep 21, 2022] Get Unlimited Access to 500-220 Certification Exam Cert Guide
Reliable Study Materials for 500-220 Exam Success For Sure
Cisco 500-220 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 28
Refer to the exhibit.
This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?
- A. All APs stop functioning in 30 days.
- B. All network devices stop functioning in 30 days.
- C. One AP Immediately stops functioning.
- D. All APs immediately stop functioning.
Answer: B
NEW QUESTION 29
How is high-availability supported for Cisco Meraki devices?
- A. The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high- availability pair.
- B. The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high- availability pair.
- C. An active/active high-availability pair is recommended for MX Security Appliances.
- D. Only the MX Security Appliances that use VRRP support high availability.
Answer: D
Explanation:
Reference:
_High_Availability_Pair
NEW QUESTION 30
Which two actions can extend the video retention of a Cisco Meraki MV Smart Camera? (Choose two.)
- A. enabling audio compression
- B. installing an SSD memory extension
- C. enabling motion-based retention
- D. enabling maximum retention limit
- E. configuring a recording schedule
Answer: C,E
NEW QUESTION 31
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. For IPsec tunneling, peers use UDP ports 500 and 4500.
- B. Peers contact the VPN registry at TCP port 9350.
- C. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
- D. Peers contact the VPN registry at UDP port 9350.
- E. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
Answer: C,D
Explanation:
Reference:
_Configuration_and_Troubleshooting
NEW QUESTION 32
Refer to the exhibit.
During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes this behavior?
- A. An AP has Site Survey mode enabled.
- B. An AP cannot connect to the default gateway.
- C. An AP does not have a wired connection to the network.
- D. An AP has never connected to the Meraki Cloud Controller.
Answer: D
Explanation:
Reference:
Troubleshooting_local_connection_issues_using_default_SSID_on_MR_Access_Points
NEW QUESTION 33
Refer to the exhibit.
The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?
- A. Configure the MX appliance to Routed mode on the Addressing & VLANS page.
- B. Remove the connection from Internet 1.
- C. Physically disconnect all LAN ports.
- D. Add a deny any/any firewall rule to the end of the firewall rules.
Answer: C
NEW QUESTION 34
Which API endpoint clones a new Organization?
- A. PUT /organizations/{organizationId}/clone
- B. POST /organizations/{organizationId}/clone
- C. POST /organizations/clone/{organizationId}
- D. POST /organizations/{organizationId}/new
Answer: D
NEW QUESTION 35
Refer to the exhibit.
Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)
- A. Set the speed of the cellular uplink to zero.
- B. Enable load balancing.
- C. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
- D. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
- E. Change the primary uplink to "none".
Answer: B,D
NEW QUESTION 36
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.
Answer:
Explanation:
NEW QUESTION 37
Where should a network admin navigate to investigate wireless mesh information between Meraki APs?
- A. Wireless > Monitor > RF Spectrum
- B. Wireless > Configure > Radio Settings
- C. Wireless > Monitor > Access Points > AP > RF
- D. Wireless > Monitor > Wireless Health
Answer: C
NEW QUESTION 38
What occurs when a configuration change is made to an MX network that is bound to a configuration template?
- A. The more restrictive configuration is preferred.
- B. The template configuration overrides the configuration change in the bound network.
- C. The configuration change in the bound network overrides the template configuration.
- D. The configuration change in the bound network is combined with the template configuration inside the template.
Answer: D
Explanation:
Reference:
Managing_Multiple_Networks_with_Configuration_Templates
NEW QUESTION 39
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
- A. Selective wipe
- B. OS updates
- C. Send notification
- D. Remote Desktop
- E. Screenshot
Answer: A,D
NEW QUESTION 40
Refer to the exhibit.
Which outcome occurs when logging is set to Enabled?
- A. Outbound flows are sent to a configured syslog server if a syslog sender is configured for flows.
- B. This firewall rule is now enabled.
- C. The hits counter within this section is now enabled.
- D. Inbound flows are sent to a configured syslog server if a syslog server configured for flows.
Answer: D
NEW QUESTION 41
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- B. WebEx traffic will be load-balanced between both active WAN links.
- C. WebEx traffic will prefer WAN 1 as it is the primary uplink.
- D. WebEx traffic will prefer WAN 2 as long as it is up.
Answer: C
NEW QUESTION 42
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?
- A. Create a profile with automatic update enabled and apply it to iOS devices.
- B. Create a security policy that enables automatic updates.
- C. No configuration step is necessary; automatic updating is the default behavior.
- D. Configure automatic updating of iOS devices in the Meraki installed profile.
Answer: B
NEW QUESTION 43
For which two reasons can an organization become "Out of License"? (Choose two.)
- A. more hardware devices than device licenses
- B. expired device license
- C. licenses that do not match the serial numbers in the organization
- D. licenses that are in the wrong network
- E. MR licenses that do not match the MR models in the organization
Answer: A,B
NEW QUESTION 44
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
- A. zone exclusion
- B. privacy window
- C. restricted mode
- D. area or interest
- E. sensor crop
Answer: C
NEW QUESTION 45
Which information is used to calculate whether a WAN link has high usage?
- A. value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration
- B. total number of devices that are actively passing traffic
- C. data under Security & SD WAN > Appliance Status > Uplink > Live Data
- D. total historical throughput of an uplink
Answer: A
NEW QUESTION 46
Which two primary metrics does Meraki Insight use to calculate the Application Performance Score? (Choose two.)
- A. Application Response Time
- B. Maximum Jitter
- C. Total Bandwidth Usage
- D. Maximum Latency
- E. Per-flow Goodput
Answer: A,E
NEW QUESTION 47
What are two roles of the network and device tags in a Dashboard? (Choose two.)
- A. Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.
- B. Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.
- C. Tags enable administrators to configure a combination of network and device specific tags to create summary reports filtered for specific devices across multiple networks.
- D. Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.
- E. Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.
Answer: C,D
Explanation:
Reference:
Organization_Menu/Manage_Tags
NEW QUESTION 48
......
Cisco 500-220 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Exam Name | Engineering Cisco Meraki Solutions |
| Duration | 90 minutes |
| Number of Questions | 55-65 |
| Sample Questions | Cisco 500-220 Sample Questions |
| Exam Code | 500-220 ECMS |
| Recommended Training | Engineering Cisco Meraki Solutions Part 1 (ECMS1) Engineering Cisco Meraki Solutions Part 2 (ECMS2) |
| Exam Price | $300 USD |
New Cisco 500-220 Dumps & Questions: https://prepcram.pass4guide.com/500-220-dumps-questions.html